Writing A Frame With A Trail To Memory - Paint - Sony DVS-7300 System User Manual

Basic Frame Memory Operations
Writing a Frame With a Trail to Memory – PAINT
Writing a frame with a trail to memory
To freeze an image with a trail and write it to memory, use the following
procedure.
1
2
6-12
Chapter 6 Frame Memory
In the FRAME MEMORY 1 menu, select item 2 (PAINT).
The PAINT menu appears. This automatically selects a dedicated pattern
as the mask source.
MEMORY
CLEAR
PAINT
OFF
F1 F2 F3
Function key indications in the PAINT menu
(F4 (FREEZE MODE) does not appear on a D2 system.)
Press F5 (INPUT SELECT), to select the type of input video (MATTE or
BUS).
For details, see step 4 in the section "To create a new video image and
write it to frame memory" (page 6-8).
Note
If F6 (NAM) in the MANUAL menu is set to "ON", it is not possible to
select "MATTE". In this case, set F6 (NAM) to "OFF" in the MANUAL
menu.
INPUT
PATTERN
SELECT
BUS
F4 F5 F6 F7
[CENTER] HUE PATTERN
POS ROTATE MODIFY
OFF OFF
F8 F9 F10