Sony DVS-7300 System User Manual page 413

Setup Relating to Keyers, Wipes and Other Effects (EFFECT Menu)
Carrying out setup relating to keyers (KEYER menu)
You can use the KEYER menu for the following settings.
• Toggling the key memory function on and off
• Saving default values of clip, gain and density for individual keyers
• Toggling the chroma key memory function on and off
• Setting input signals for the six chroma key memories
To carry out these settings, use the following procedure.
1
2
13-42
Chapter 13 Setup
In the EFFECT menu, press F3 (KEYER).
The KEYER menu appears.
KEY CRK DEFAULT
MEMORY MEMORY LEARN
ON OFF
F1 F2 F3
Function key indications in the KEYER menu
Carry out the operation in the following table to make the required
setting.
Setting Operation
Toggling the key Press F2 (KEY MEMORY).
memory function on
This toggles the setting on and off.
and off
Saving default Use the following procedure.
values of clip, gain
1 Press F4(DEFAULT LEARN) to display the function key
and density
indications for saving default values.
2 According to the keyer for which you wish to save default
values, press one of F1 (M/E-1 KEY1) to F10 (DSK4).
The current settings on the selected keyer are saved as
the default values.
Toggling the Press F3 (CRK MEMORY).
chroma key This toggles the setting on and off.
memory on and off
CRK
MEMORY
ASSIGN
F4 F5 F6 F7 F8 F9 F10
(Continued)