Sony DVS-7300 System User Manual page 466

To assign DME registers to buttons
Use the following procedure.
1
If in the SHOTBOX menu "DME" is not selected, press the cursor
movement button (/) to select it.
The menu appears as follows.
RCALL REGS
S. S EFF
BUTTON
No.
No. No.
#2
F1 F2 F3
Function key indications in the SHOTBOX menu (with "DME" selected)
2
Press F1 (BUTTON No.) or turn control knob 2 to align the cursor with
the number of the button to be assigned.
3
• To assign a snapshot register, press F2 (S.S No.), then enter the register
number with the numeric keypad.
• To assign a key frame effect register, press F3 (EFF No.), then enter the
register number with the numeric keypad.
4
Press F4 (GLBL) to F10 (CH6) to select the channel used.
Repeat steps 2 to 4 as required, to assign the buttons.
Note
For the same button number, it is not possible to assign different snapshot
register numbers on the switcher and DME. It is also not possible to assign
different key frame effect register numbers.
Setting the recall mode when recalling a key frame register
With "SWITCHER" selected, press F9 (RECALL MODE) to make the
selection.
RECALL: Carry out a recall only.
R & R: After the recall, carry out a rewind.
Carrying out a recall test
With "SWITCHER" selected, press F10 (RECALL).
CHANNEL SELECT
GLBL CH3
CH1 CH2
F4 F5 F6 F7
CH4 CH5 CH6
F8 F9 F10
13-95
Chapter 13 Setup