Table of Contents
Advertisement
Setup Relating to Operations From the Control Panel
(OPERATION Menu)
5
6
7
8
9
13-70
Chapter 13 Setup
Press F10 (SOURCE NAME).
The SOURCE NAME menu appears.
SOURCE
SELECT
#2
F1
F2
F3
Function key indications in the SOURCE NAME menu
Press F2 (SOURCE SELECT) or turn control knob 2 to move the cursor
and select the signal to which you wish to assign a name.
Either press F8 (NAME SELECT) or turn control knob 3 to move the
cursor; or either press F9 (USER NAME SELECT) or turn control knob
4 to move the cursor, and then select the required signal name.
To enter a new signal name
Press F8(NAME SELECT), and then select USER in the list of example
signal names.
Press F6 (SELECT).
When you have selected a signal name attached with "?" in step 7,
further specify the required number and press the ENTER button.
• If you selected USER in step 7, a text input screen appears. In this
case, advanc to step 9.
• In other cases, the name selection is confirmed.
Using the keyboard displayed on the screen and the numeric keys in the
numeric keypad section, enter a name of up to eight characters, and press
the F9 (ENTER) or the ENTER button in the numeric keypad section to
confirm the name.
For details of the input method, see page 3-11.
SELECT
F4
F5
F6
F7
USER
SET
NAME
NAME
USER
SELECT
SELECT
NAME
#3
#4
F8
F9
F10
Advertisement
Table of Contents
