Sony DVS-7300 System User Manual page 158

5
Set the parameters.
When you selected BOX:
Knob Parameter
1 Top
2 Left
3 Right
4 Bottom
1 Softness
When you selected a pattern:
Knob Parameter
1 Size
2 Softness
4 Pattern No.
a) The patterns are the same as wipe patterns 1 though 23. (See the Appendix "Wipe
Patterns" (page A-2).)
6
When you selected F3 (PATTERN), press any of F4 (POS) to F7
(ROTATION), turning them on, to modify the selected pattern as
desired.
For details of the operation, see step 7 in the procedure for "Masking"
(page 4-60).
Applying a flying shadow
Use the following procedure to apply a shadow to the key fill and source
recalled from DSK frame memory.
1
In the ZABTON/SHADOW menu, set F10 (FLYING SHADOW) to ON.
2
Adjust the parameters.
Knob Parameter
1 H Pos
2 V Pos
4 Density
Setting
Top edge position (0.00 to 100.00)
Left edge position (0.00 to 100.00)
Right edge position (0.00 to 100.00)
Bottom edge position (0.00 to 100.00)
Degree of edge softness (0.00 to 100.00)
Setting
Size of the pattern (0.00 to 100.00)
Degree of edge softness (0.00 to 100.00)
Pattern number (1 to 23)
Setting
Horizontal position (–50.00 to +50.00)
Vertical position (–50.00 to +50.00)
Density (0.00 to 100.00)
Chapter 4 Basic Operations for Image Creation
a)
4-91