Table of Contents
Advertisement
Basic Register Operations
Assigning a name to a register
Use the following procedure to assign a name to a register.
1
2
3
4
5
9-10
Chapter 9 Registers
In the REGISTER menu, select either of the following items, depending
on the type of register you wish to name.
Item 1 (EFFECT): key frame effect registers
Item 2 (SNAPSHOT): snapshot registers
Depending on the item you select, the EFFECT or SNAPSHOT menu
appears.
Press F5 (NAME), turning it on.
Function key indications for F7 to F10 now appear.
Press one of F7 to F9 to select whether to apply a name to one or more
registers.
F7 (ALL): Apply the same name to all registers.
F8 (BLOCK): Apply a name to a block of contiguous registers.
F9 (ONE): Apply a name to a single register.
• If you pressed F7 (ALL), proceed to step 5.
• If you pressed F8 (BLOCK) or F9 (ONE), the register number input
position switches to reverse video. In this case continue to step 4.
Enter the number of the register to which you wish to assign a name,
using the numeric keypad.
If in step 3 you pressed F8 (BLOCK), enter the first and last registers in
the block of registers to which you wish to apply the name.
Press F10 (EXEC).
The function key indications change, and a text input screen appears.
Advertisement
Table of Contents
