Sony DVS-7300 System User Manual page 184

Modifying the edge of the wipe pattern
To modify the edge of the wipe pattern, use the following procedure.
• For a PGM/PST wipe
1
In the PGM/PST WIPE menu, select item 3 (EDGE).
The EDGE menu appears.
EDGE TYPE
BORDER SOFT
OFF
F1 F2 F3
Function key indications in the EDGE menu
2
Press one of F1 through F4, turning it on, and adjust the parameters.
F1 (OFF): unmodified edge.
F2 (BORDER): apply a border. A dedicated color matte is used to fill
the border. (Unlike the M/E banks, it is not possible to carry out a
color mix using mattes of two colors.)
Knob Parameter
1 Luminance
2 Saturation
3 Hue
4 Width
F3 (SOFT): soften the edge.
Knob Parameter
1 Softness
F4 (SOFT BORDER): apply a soft border.
Knob Parameter
1 Luminance
2 Saturation
3 Hue
4 Width
1 Inner Soft
2 Outer Soft
4 Width
SOFT
BORDER
F4 F5 F6 F7
Setting
Set luminance (0.00 to 100.00)
Set saturation (0.00 to 100.00)
Set hue (0.00 to 359.99)
Set width (0.00 to 100.00)
Setting
Set the degree of edge softness (0.00 to 100.00)
Setting
Set luminance (0.00 to 100.00)
Set saturation (0.00 to 100.00)
Set hue (0.00 to 359.99)
Set width (0.00 to 100.00)
Inner edge softness of the border (0.00 to 100.00)
Outer edge softness of the border (0.00 to 100.00)
Set width (0.00 to 100.00)
Chapter 4 Basic Operations for Image Creation
F8 F9 F10
4-117