Sony DVS-7300 System User Manual page 41

Program/Preset Bank
5 Wipe direction selection buttons
When you have selected a wipe or DME
wipe as the transition type, press one of
these buttons, turning it on, to select the
wipe direction.
NORM (normal) button: The wipe
proceeds in the direction from black to
white as shown on the wipe pattern in
the list of wipe patterns (page A-2)
and of DME wipe patterns (page A-4),
or in the direction of the arrow.
REV (reverse) button: The wipe
proceeds in the opposite direction to
that when the NORM button is
pressed.
NORM/REV (normal/reverse) button:
Alternate wipes go in normal and
reverse directions.
6 FADE TO BLACK button
Press this button, turning it on, to fade to
black. At the end of the transition, when
the video output is completely black, the
button lights red.
You can set the transition duration of the
fade-to-black, using a menu setting.
2-26
Chapter 2 Location and Function of Parts
7 Key parameter setting knobs and
displays
These have the same basic function as on
the M/E banks (see page 2-19), but the
parameters controlled are only clip, gain
and density. For other parameters, use the
DSK menu.
The optional BKDS-7032 DSK control
panel unit which can be fitted to the
BKDS-7011/7012 model, however, has no
key parameter setting knobs and displays.
On this control panel unit, use the DSK
menu for all parameter settings.