Table of Contents
Advertisement
3
Select the key source signal you wish to allocate to the key fill, using
either of the following methods.
• Hold down F6 (SOURCE) and press the required cross-point button in
the auxiliary bus bank.
• Hold down F6 (SOURCE) and use the cursor movement keys to select
the required cross-point button.
• Hold down F6(SOURCE) and turn control knob 3.
• Hold down F6(SOURCE) and enter the required cross-point button
number using the numeric keypad.
Changing switcher functions (OPERATION MODE menu)
You can use the OPERATION (operation) MODE menu for the following
settings.
• Setting the background transition flip-flop mode: Toggle between the
bus flip-flop mode ("ON" setting) and bus fixed mode ("OFF" setting)
for carrying out background transitions.
• Setting the downstream keyer auto drop function: Select whether the
downstream keyer (DSK1/2/3/4) specified in the menu is automatically
switched off when a cross-point button in the PGM row of the PGM/PST
bank of 3.5 M/E system is pressed.
OFF: Pressing a cross-point button in the PGM row does not of itself
turn the downstream keyer off.
ON: The downstream keyer auto drop function is enabled. Simply
pressing a cross-point button in the PGM row automatically turns the
corresponding downstream keyer off.
• Setting the cross-point button shift function: Select the cross-point button
shift function setting from the following.
RIGHT: The shift function is enabled with the rightmost button (button
28) as the shift button.
LEFT: The shift function is enabled with the leftmost button (button 0)
as the shift button.
OFF: The shift function is disabled.
• Settintg the cross-point shift button lock/unlock function: Whether or
not the shift button locks when pressed.
OFF: The shift button does not lock. That is, to shift a cross-point button
selection, you must always hold down the shift button.
13-73
Chapter 13 Setup
Advertisement
Table of Contents
