Table of Contents
Advertisement
To create or change the signal name selected with F9 (USER
NAME SELECT)
Use the following procedure.
1
Press F10 (SET USER NAME).
A text input screen appears.
2
Press F1 (SET USER NAME) or turn control knob 2 to move the cursor
and select free space for creating a new signal name or select the existing
signal name to be corrected.
3
Enter a new signal name as in step 9 of the foregoing procedure.
To enable the setting of a signal name using steps 7 and 8 of the
foregoing procedure, press F6 (?) to postfix "?" to the signal name.
13-71
Chapter 13 Setup
Advertisement
Table of Contents
