Sony DVS-7300 System User Manual page 261

3
Press F7 (PATTERN), and adjust the parameters.
Knob
1
2
4
To apply a pattern modifier to the selected pattern, press F10 (PATTERN
MODIFY), displaying the PATTERN MODIFY menu.
For details of the operation, see step 7 of the procedure in the section
"Using the main mask" (page 4-60).
4
Press F8 (POS), setting it to "ON", and adjust the parameters to move the
pattern to the start position of the trail.
Knob
1
2
5
When you are ready to freeze the input video, press F1 (PAINT), turning
it on.
Writing to frame memory begins at this point.
6
Turn control knobs 1 and 2 to create the required trail.
7
Press F1 (PAINT) again, turning it off.
The image with trail is now written to memory.
Using a rotating hue for the paint color
When "MATTE" was selected as the input video, you can make the hue of
the matte color rotate as the trail is created; to do this, set F9 (HUE
ROTATE) to "ON".
Parameter Setting
name
Size Size of pattern (0.00 to 100.00)
Softness Degree of edge softness (0.00 to 100.00)
Pattern No. Pattern number (1 to 27)
Parameter Setting
name
H Pos Horizontal position (–50.00 to +50.00)
V Pos Vertical position (–50.00 to +50.00)
Chapter 6 Frame Memory
6-13