Basic Operation For Key Settings Using A Menu - Sony DVS-7300 System User Manual

Digital video switcher system, operation software bzs-7020
Hide thumbs Also See for DVS-7300 System:
Table of Contents

Advertisement

Keys

Basic Operation for Key Settings Using a Menu

You can carry out key setting operations either by using a menu, or by using
the key control section of the control panel.
This section describes the basic menu operations for key settings for the M/E
banks.
For details of the operations for key settings using the key control section,
see page 4-64.
For details of the key settings for the downstream keyer, see page 4-68.
Key setting menus for the M/E banks
The key setting menus for the M/E banks are listed in the following table.
Bank
M/E-1
M/E-2
M/E-3
Accessing a key setting menu
For example, to access the M/E-1 KEY 1 menu, use either of the following
operations:
• In the M/E-1 group of the menu control section, press the KEY 1 top menu
button.
• In the transition control section of the M/E-1 bank, press the KEY 1 next
transition selection button twice in rapid succession.
• In the key control section of the M/E-1 bank, press the KEY 1 keyer
delegation button twice in rapid succession.
When you carry out any of the above operations, the M/E-1 KEY 1 menu
shown below appears.
If you pressed the KEY 1 button in either the next transition control section
or the key control section twice in rapid succession, at the same time as the
menu appears the key control section is delegated to keyer 1.
4-46
Chapter 4 Basic Operations for Image Creation
Keyer
Menu
key 1
M/E-1 KEY1
key 2
M/E-1 KEY2
key 1
M/E-2 KEY1
key 2
M/E-2 KEY2
key 1
M/E-3 KEY1
key 2
M/E-3 KEY2

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dvs-7350 system

Table of Contents