Checking The Board Configuration - Sony DVS-7300 System User Manual

5
Press F10 (SAVE).
This writes the adjustment values to non-volatile memory on the input
board.
The settings are now maintained by the BKDS-7111 board even when
the power is turned off and on.
6
Repeat steps 3 to 5 to make the adjustments for all inputs.
About the parameter indications in the DIAGNOSIS menu screen, see page
14-5.
Note
Unlike the settings in the SETUP menu, the DIAGNOSIS menu settings
cannot be saved to floppy disk.

Checking the Board Configuration

Checking the configuration of the boards installed in the switcher
In the DIAGNOSIS menu, select item 1 (SWER PROC), then press F3
(BOARD CONFIG).
The board configuration appears in the menu display.
Checking the configuration of the boards installed in the DMK-
7000
In the DIAGNOSIS menu, select item 2 (DMK PROC), then press F3
(BOARD CONFIG).
The board configuration appears in the menu display.
Chapter 14 DIAGNOSIS Menu Operations
14-7