Sony DVS-7300 System User Manual page 341

Disk Operations
3
10-8
Chapter 10 Floppy Disk Operations
Function key indications for F7 to F10 now appear. (If you selected F3
(COPY), the indication for F7 (ALL) does not appear.)
FUNCTION
[FORMAT] [LABEL]
LOAD COPY DELETE
SAVE
F1 F2 F3
Function key indications after selecting one of F1 to F5
Press one of F7 to F9 to select the way in which you specify the registers
or files to which the operation applies.
F7 (ALL): Specify all registers or files.
F8 (BLOCK): Specify a block of contiguous registers or files.
F9 (ONE): Specify a single register or file.
• If you pressed F7 (ALL), proceed to step 6.
When you select F7 (ALL), a save or load operation transfers the
contents of each register to the same numbered file or vice versa.
• If you pressed F8 (BLOCK) or F9 (ONE), the input position for the
register or file number switches to reverse video, and for save, load and
copy operations, "FROM" (source) and "TO" (destination) also appear.
In this case continue to step 4.
ALL
RENAME
F4 F5 F6 F7
FILE SELECT
BLOCK ONE EXEC
F8 F9 F10