Sony DVS-7300 System User Manual page 200

DME wipe snapshot operations
When you have finalized an M/E DME wipe pattern, complete with its
various modifications, you can save the whole setting using a numeric key in
the FlexiPad, for instant recall when required.
To save a DME wipe snapshot
For example, to save the DME wipe settings on the M/E-1 bank, hold down
the DME button in the FlexiPad of the M/E-1 bank and press one of the
numeric keys 1 to 9 which is not lit.
This saves the data in the register corresponding to the number of the numeric
key which you have pressed.
Note
When a numeric key is lit, there is a DME wipe snapshot already stored in
the corresponding register. If you hold down the DME button and press one
of the numeric keys which is lit, the contents of the register are overwritten.
To recall a DME wipe snapshot
In the FlexiPad, press the DME button, turning it on, then press the numeric
key corresponding to the required register.
To return to the state immediately before recalling a DME wipe
snapshot ("LAST X" function)
In the FlexiPad, press the DME button, turning it on, then press the numeric 0
key.
4-133
Chapter 4 Basic Operations for Image Creation