Sony DVS-7300 System User Manual page 170

Applying wipe modifiers
You can modify wipe patterns, for example to reverse the wipe direction, or
change the position of the pattern. Note, however, that depending on the
pattern you have selected, not all modifiers may be usable.
For details of possible combinations of wipe patterns and modifiers, see the
table on page 4-98.
Selecting the wipe direction
Positioning the pattern
To apply these modifiers, use the following procedure.
1
In the M/E-1 WIPE menu, select item 2 (DIRECT/POS).
The DIRECT/POS menu appears.
NORMAL
F1
2
To specify the wipe direction, press one of F1 through F3, turning it on.
F1 (NORMAL): Carry out the wipe in the forward direction.
F2 (NORMAL/REVERSE): Carry out alternate wipes in opposite
directions.
F3 (REVERSE): Carry out the wipe in the reverse direction.
3
To position a pattern, press F4 (POS) for the main pattern, or F7 (POS)
for the subsidiary pattern, turning it on, then adjust the parameters.
Knob
1
2
To return the pattern position to the center of the screen
Hold down the SHIFT button (the indication above F4 changes to
"CENTER"), and press F4 (CENTER).
DIRECTION MAIN POSITIONER
NORMAL/ [CENTER]
REVERSE
REVERSE POS
OFF
F2 F3 F4
Function key indications in the DIRECT/POS menu
Parameter Setting
H Pos Set the horizontal position of the pattern (–50.00 to
+50.00)
V Pos Set the vertical position of the pattern (–50.000 to
+50.00)
SUB POSITIONER
AUTO [CENTER]
NORMAL
NORMAL CENTER POS
OFF
F5 F6 F7 F8
Chapter 4 Basic Operations for Image Creation
AUTO
CENTER
F9 F10
(Continued)
4-103