Sony DVS-7300 System User Manual page 450

To carry out these settings, use the following procedure.
1
In the OPERATION menu, press F5 (OPERAT MODE).
The OPERATION MODE menu appears.
BUS DSK AUTO XPT
TOGGLE DROP SHIFT
ON RIGHT
F1 F2 F3
Function key indications in the OPERATION MODE menu
2
Carry out the operation in the following table to make the required
setting.
Setting
Setting the
background transition
flip-flop mode
Setting the
downstream keyer
auto drop function
Setting the cross-
point button shift
function
Setting the cross-
point shift button lock/
unlock function
Setting custom modes Skip to step 3.
Setting the
programmable button
function
SHIFT CUSTOM
LOCK
OFF
F4 F5 F6
Operation
Press F1 (BUS TOGGLE).
This toggles the setting between ON and OFF.
Carry out the following procedure.
1 Press F2 (DSK AUTO DROP).
The DSK AUTO DROP menu appears.
2 Press one of F1 (DSK1) to F4 (DSK4) according to the
downstream keyer to which the setting applies.
Pressing the button toggles the auto drop function on
and off.
Press F3 (XPT SHIFT).
This cycles the setting through OFF, RIGHT and LEFT.
Press F4 (SHIFT LOCK).
This cycles the setting through OFF, ON and HOLD.
Carry out the following procedure.
1 Press F8 (PROGRAM BUTTON).
The PROGRAMMABLE BUTTON menu appears.
2 Hold down F1 (PROGRAM BUTTON), and from the
flashing programmable buttons, press the desired one.
The selected button name in the list on the screen
changes to reverse video.
3 Either press F7 (FUNC SELECT) or turn control knob 3
to align the cursor with the desired function from the list.
4 Press F5 (SELECT).
This assigns the function selected in step 3 to the
button selected in step 2.
PROGRAM
MODE BUTTON
F7 F8 F9 F10
(Continued)
Chapter 13 Setup
13-79