Sony DVS-7300 System User Manual page 212

To display the status of DME wipe snapshot information stored in
the FlexiPad
In the required M/E bank, press the DME button in the FlexiPad twice in
rapid succession.
Alternatively, display the status for the corresponding bank (e.g. for the M/E-
1 bank, display the M/E-1 STATUS menu), and press F3 (DME WIPE).
In this menu, the status of the DME wipe snapshot saved in each of the nine
buttons in the FlexiPad appears, and it is also possible to change some of the
modifier settings.
Selected DME wipe pattern
DME wipe modifier settings
M/E-1 STATUS
WIPE
M/E-1
1901
NORMAL
M/E-2
PROG
BORDER
1
M/E-3
ALL
DIRECTION
SNAP DME NORMAL/
SHOT WIPE WIPE NORMAL REVERSE REVERSE
Specify DME wipe direction
M/E-1 STATUS screen (with DME WIPE selected)
Patterns saved in the nine buttons
FILEXI PAD
BORDER
PROG H Position
–50 0.00
1
7 8 9
V Position
4 5 6
–50 0.00
1 2 3
Width
0 10.00
Chapter 4 Basic Operations for Image Creation
50
When POSITIONER is
"ON", you can adjust the
pattern position with
50
control knobs 1 and 2.
When a border or soft
100
border is selected, you
can adjust the width
with control knob 4.
When a soft edge is
selected, you can adjust
the degree of softness
with control knob 4.
4-145