Sony DVS-7300 System User Manual page 379

Setup Relating to the Overall Switcher System (SYSTEM Menu)
2
3
13-8
Chapter 13 Setup
Carry out the operation in the following table to make the required
setting.
Setting
Setting the date
Setting the time
Selecting the signal format
Toggling the 7.5 IRE setup on
or off (D2-525 systems only)
Setting the screen aspect
ratio
Selecting the video switching
timing
Selecting the state at power
on
Alarm setting
Press F3 (SIGNAL FORMAT), F4 (7.5 SETUP) or F5 (SCREEN
FORMAT).
The SIGNAL FORMAT menu appears.
FORMAT
D2-525 D1-525 D1-625
F1 F2 F3
Function key indications in the SIGNAL FORMAT menu
Operation
Press F1 (DATE), then enter the date from the
numeric keypad, in the American order (mm-dd-
yy), but separating the items by periods.
For example, to set the date to 5th December
1995, enter "12.5.1995" then press the ENTER
button.
Press F2 (TIME), then enter the time (hh:mm:ss)
from the numeric keypad, using the 24-hour clock
and separating the items by periods.
For example, to set the time to 14:25:20, enter
"14.25.20" then press the ENTER button.
Go to step 3.
Go to step 3.
Go to step 3.
Press F6 (SWITCH TIMING).
This cycles the setting through ANY, EVEN and
ODD (D2 systems)/ANY, F1 and F2 (D1
systems).
Press F7 (RESUME) or F8 (PANEL RESUME).
This toggles the setting on and off.
Press F9 (ALARM).
This toggles the setting on and off.
SCREEN
7.5
4:3 16:9 SETUP
F4 F5 F6 F7 F8 F9 F10