Table of Contents
Advertisement
Disk Operations
7
8
Formatting a disk and applying a label to a disk
Use the following procedure.
1
10-10
Chapter 10 Floppy Disk Operations
To execute the operation, press F9 (YES).
To abandon the operation without executing it, press F10 (NO).
Using the keyboard displayed on the screen and the numeric keys in the
numeric keypad section, enter a name of up to eight characters, and press
F9 (ENTER) or the ENTER button in the numeric keypad section to
confirm the name.
If you selected F7 (ALL) in step 3, this applies the same name to all files,
and if you selected F8 (BLOCK), it applies the same name to all files in
the block.
For details of the input method, see page 3-11.
In the menu display obtained in step 1 of the previous procedure (the
section "Disk operations on key frame effect and snapshot data"), hold
down the SHIFT button and press F1 (FORMAT) or F2 (LABEL) to
select the operation you wish to carry out.
F11 (FORMAT) (hold down the SHIFT button and press F1): Format
the disk.
F12 (LABEL) (hold down the SHIFT button and press F2): Apply a
label to the disk.
Note
Formatting a disk destroys any data already stored on the disk. Check
carefully that existing data is not required before reformatting a disk
which you have previously used.
Advertisement
Table of Contents
