Table of Contents
Advertisement
Setup Relating to Input/Output Signals (INPUT/OUTPUT Menu)
Menu
THROUGH
MODE
OUTPUT
ASSIGN
Carrying out setup relating to switcher input signals
(SWITCHER INPUT menu) (in a D2 system)
You can use the SWITCHER INPUT menu for the following settings.
• Selecting 8- or 10-bit mode for a digital input signal
• Selecting the GEN LOCK mode for an analog input signal: Select
• Adjusting the hue of an analog input signal: Adjust the hue of the analog
• Adjusting the SCH (subcarrier-to-horizontal) phase of an analog input
• Adjusting the horizontal phase of an input signal: Adjust the horizontal
• Selecting automatic color framing correction by video shifting: If the
13-20
Chapter 13 Setup
Menus accessed from the INPUT/OUTPUT menu (Continued)
Functions
Making settings relating to through mode (the
mode in which sync signals included in output
signals are passed through unchanged,
instead of being replaced by an internally
generated sync signal)
• Input through mode setting
• Output through mode setting
Assigning switcher and DMK-7000 output
signals
• Selecting the clean output of the switcher or
DMK-7000.
• Selecting the preview outputs of the switcher
M/E banks and DMK-7000
• Defining the switcher and DMK-7000
preview outputs
• Setting the auto clean function
• Setting the auto preview function
• Setting the auto preview 2 function
AUTO, SYNC or REF.
AUTO: Lock, using the color burst signal as reference. If there is no
color burst signal, use the horizontal sync signal as reference.
SYNC: Lock, using the horizontal sync signal as reference.
REF: Lock, using the external sync signal input to the switcher as
reference. When the input signal is accompanied with no sync signal,
select this mode.
input signal in the range –45.0 to +45.0 degrees.
signal
phase of the input signal in the range –16 to +16 CK (clock cycles).
color framing phase of the input signal is inverted, the automatic color
framing correction function shifts the image horizontally to maintain
color framing continuity.
Function key See page
F8 (THRU
13-33
MODE)
F9 (OUTPUT
13-35
ASSIGN)
Advertisement
Table of Contents
