Sony DVS-7300 System User Manual page 376

Menus accessed from the SYSTEM menu (Continued)
Menu Functions
SYSTEM • Setting the system configuration
CONFIGU- • Setting the DMK-7000
RAION configuration
• Setting the switcher program
output (3M/E system only)
• Setting the final M/E controlled
from the remote panel
• Setting the phase relation
between the external sync signal
input to the switcher and the
output signals of the switcher
• Making multiple cross-point
assignments
BACKUP • Saving the setup data in
nonvolatile memory
• Making the setup data write-
protected or not
INITIALIZE • Resetting the switcher and
control panel to the state at
power on
• Resetting the DMK-7000 to the
state at power on
• Clearing the switcher memory
and control panel memory and
initializing the switcher and
control panel based on the
default setup data
• Clearing the DMK-7000 memory
and initializing the DMK-7000
based on the default setup data
INFORMATION Displaying the software version
numbers
Function key See page
F4(SYSTEM 13-10
CONFIG)
F5 (BACKUP) 13-13
F6 (INITIALIZE) 13-15
F7 13-16
(INFORMATION)
Chapter 13 Setup
13-5