Table of Contents
Advertisement
Keys
4
4-80
Chapter 4 Basic Operations for Image Creation
When applying a drop border or shadow:
Knob
Parameter
1
Width
2
Position
4
Density
1
Luminance
2
Saturation
3
Hue
4
Density
a) For the details of "4H DROP ON" and "4H DROP OFF" modes, see "Edge types and
key fill/key source positions" (page 4-55).
b) Unlike an M/E key, for a downstream key you can adjust the edge position continuously.
When using the outline function:
Knob
Parameter
1
Width
4
Density
To adjust separately the width of the top, bottom, left and right sides of
the edge, press F8 (SEP EDGE), turning it on, and adjust the parameters.
Knob
Parameter
1
Top
2
Left
3
Right
4
Bottom
4
Density
To soften the edge, press F7 (SOFT EDGE), turning it on, and adjust the
degree of softness.
Knob
Parameter
1
Softness
Note
When you select a normal (unmodified) edge, the edge softening
function is not available.
Setting
Set edge width (in "4H DROP ON"
a)
"4H DROP OFF"
mode: 0 to 8)
Set edge position (in "4H DROP ON "
359
b)
; in "4H DROP OFF"
a)
Set density (0.00 to 100.00)
Set luminance (0.00 to 100.00)
Set saturation (0.00 to 100.00)
Set hue (0.00 to 359.99)
Set density (0.00 to 100.00)
Setting
Set width (0 to 4)
Set density (0.00 to 100.00)
Setting
Top edge width (0.00 to 4.00)
Left edge width (0.00 to 4.00)
Right edge width (0.00 to 4.00)
Bottom edge width (0.00 to 4.00)
Set density (0.00 to 100.00)
Setting
Set the degree of edge softness (0.00 to 100.00)
a)
mode: 0 to 4; in
a)
mode: 0 to
mode: 180 to 359
b)
)
Advertisement
Table of Contents
