Dme Control Section (Bkds-7031 Dme Control Panel Unit - Option) - Sony DVS-7300 System User Manual

DME Control Section (BKDS-7031 DME
Control Panel Unit – Option)
MENU
ASP
SKEW
PERS
ORTHG
X
CLR
WORK
BUFR
Using the optional DME control panel,
you can assign the action of menu
operations, and carry out wipe pattern
positioner operations. Furthermore, for
the auto chroma key function, you can not
only carry out positioner functions on the
sample mark, but also control its size.
The following describes these functions.
For details of functions and buttons
relating to DME operations, refer to the
BZDM-7720/3720 User's Guide.
Trackball: Press the MENU button,
turning it on, to assign the trackball to
control knob operations. Horizontal
movement (X) corresponds to knob 1,
and vertical movement (Y) to knob 2.
2-36
Chapter 2 Location and Function of Parts
SRCE TRGT
LOC LOC
SIZE XYZ
AXIS
ROT
LOC
Y Z
VELO
CTR
HOLD
BKDS-7031 DME Control Panel Unit
Z-ring: Press the MENU button, turning
it on, to assign the Z-ring to knob 3
operations. This function is used for
adjustment of the size of the sample
mark in the auto chroma key function.
MENU button: Press this button, turning
it on, to assign the trackball and Z-ring
to control knob operations, for use as a
positioner. Changing the menu ends
this assignment, but it is possible to
keep the trackball and Z-ring assigned
to the menu operations by the
following method.
Trackball
Z-ring