Sony DVS-7300 System User Manual page 342

4
Depending on the operation you are carrying out, enter a register or file
number, as shown in the following table, in the reverse video position
using the numeric keypad, then press the ENTER button.
Operation
Save
Load
Copy
Delete
Applying a name to a file
• If you pressed F8 (BLOCK) in step 3, enter the first register or file
number, and then the last register or file number in the block of
registers or files to which the operation applies.
• After pressing the ENTER button to confirm the setting, continue to
step 5 for a save, load, or copy, and skip to step 6 for a delete or file
naming operation.
5
In a similar way to step 4, enter the number of the register or file, as
shown in the following table, in the reverse video position using the
numeric keypad, then press the ENTER button.
Operation
Save
Load
Copy
• If you pressed F8 (BLOCK) in step 3, enter the first destination register
or file number only.
6
Press F10 (EXEC).
• If you selected F5 (RENAME) in step 2, the function key indications
change, and a text input screen appears. In this case, go to step 8.
• In other cases, the function key indications change, and functions keys
F9 (YES) and F10 (NO) appear. In this case continue to step 7.
Register or file to be specified
Register whose contents are to be saved
File to be loaded
File to be copied
File to be deleted
File to which the name is to be applied
Register or file to be specified
Destination file
Destination register
Destination file
Chapter 10 Floppy Disk Operations
(Continued)
10-9