Sony DVS-7300 System User Manual page 443

Setup Relating to Operations From the Control Panel
(OPERATION Menu)
Allocating a key source signal to a key fill (AUTO SELECT
ASSIGN menu)
You can use the AUTO SELECT ASSIGN menu to allocate a key source
signal to a key fill.
When you carry out a key operation on an M/E bank in AUTO SELECT
mode, this key source signal is automatically used.
Selecting a 4:4:4 format digital component signal as a chroma
key foreground in a D1 system
A key fill signal and key source signal selected in this menu are treated as a
4:2:2 format signal ("LINK A") and a 0:2:2 format signal ("LINK B") to be
combined as a 4:4:4 format signal and used as a foreground signal.
To carry out these settings, use the following procedure.
1
2
13-72
Chapter 13 Setup
In the OPERATION menu, press F4 (AUTO SELECT).
The AUTO SELECT ASSIGN menu appears.
FILL
F1 F2 F3
Function key indications in the AUTO SELECT ASSIGN menu
Select the key fill signal to which you wish to allocate a key source
signal, using either of the following methods:
• Hold down F3 (FILL) and press the required cross-point button in the
auxiliary bus bank.
• Hold down F3 (FILL) and use the cursor movement keys to select the
required cross-point button.
• Hold down F3(FILL) and turn control knob 2.
• Hold down F3(FILL) and enter the required cross-point button number
using the numeric keypad.
SOURCE
F4 F5 F6 F7 F8 F9 F10