Sony DVS-7300 System User Manual page 380

4
• To select a required signal format, press the corresponding function key
(F2, F3 or F4).
Signal format
D2-525
D1-525
D1-625
• To set the screen aspect ratio, press F5 (4:3) or F6 (16:9).
• To toggle the 7.5 IRE setup on or off, press F7 (7.5 SETUP).
In this case, toggling takes place immediately.
5
Press F10 (EXEC).
If the operation selected in step 4 is changing the signal format, the
system is reset to the state at power on and the signal format is changed.
The new signal format setting is immediately saved in nonvolatile
memory.
If the operation selected in step 4 is changing the screen aspect ratio, the
control panel and DME settings are reset to the state at power on and the
screen aspect ratio changes. The switcher settings are not reset.
Function key to press
F2 (D2-525)
F3 (D1-525)
F4 (D1-625)
13-9
Chapter 13 Setup