Key Frame Creation And Editing; Accessing A Register - Sony DVS-7300 System User Manual

Key Frame Creation and Editing

Accessing a Register

To recall the contents of a register, use the following procedure.
1
2
3
4
5
8-6
Chapter 8 Key Frame Effects
Press the EFF button in the numeric keypad section, turning it on.
This delegates the numeric keypad section to key frame operations.
In the sub-register selection section, press the button or buttons
corresponding to the sub-register or DME channel(s) you wish to use.
Note
It is not possible to access switcher sub-registers individually.
Whichever of the five sub-register selection buttons (M/E-1, M/E-2,
M/E-3, P/P DSK, and USER) is lit, all of the switcher sub-registers are
recalled.
Press the RCALL button, turning it on.
Enter the number of the register you wish to access.
• When creating a completely new effect, enter the number of an empty
register.
• To access the first empty register after the currently accessed register,
without making an explicit specification, enter a period only as the
number.
Press the ENTER button.
This accesses the specified register, and recalls its contents.