Table of Contents
Advertisement
DME Wipes
Adjustments on the DME Unit
• When you have selected a page turn or page roll pattern, you can adjust the
• In a DME wipe, part of the image may be filled by the DME background
• When applying a border, you can also adjust the border width on the DME.
For details of adjustments on the DME, refer to the BZDM-7720/3720 User's
Guide.
Relationship between DME wipes and other effects
This section describes the relationship between DME wipes and other effects.
Relation with ordinary wipes
• Since a DME wipe does not use the wipe generator built into the switcher,
• It is not possible to use a DME wipe pattern as the source for a pattern key
4-124
Chapter 4 Basic Operations for Image Creation
nonlinear "Angle" and "Radius" parameters, using the control panel for the
DME unit.
color. For example, in a horizontally or vertically opening door pattern (
or
), the hatched portions in the figure below are filled by the DME
background color. In this case, select the DME background color on the
DME.
Note that on the DME-7000/3000, for the background source you can select
"MIX COLOR" (another term referring to a kind of color combination) or
an external video signal.
DME image and background color in a DME door wipe
you can use a pattern produced by the wipe generator as the source for a
pattern key or mask, even while the DME wipe is executing.
or mask.
Rotating image
Background color
Advertisement
Table of Contents
