Table of Contents
Advertisement
2
Press one of F1 to F4, F11, and F12 according to the operation you wish
to carry out, turning it on.
F1 (MOVE): Move the contents of one register to another.
F2 (SWAP): Swap the contents of two registers.
F3 (COPY): Copy the contents of one register to another.
F4 (DELETE): Delete the contents of a register.
F11 (LOCK) (hold down the SHIFT button and press F1): Lock a
register or registers.
F12 (UNLOCK) (hold down the SHIFT button and press F2): Unlock
a register or registers.
Function key indications for F7 to F10 now appear.
[UNLOCK]
[LOCK]
MOVE
SWAP
COPY
F1
F2
F3
The F7 (ALL) indication only appears when you selected
F4 (DELETE), F5 (NAME), F11 (LOCK), or F12 (UNLOCK).
For details of the procedure for applying a name to a register using F5
(NAME), see page 9-10.
3
Press one of F7 to F9 to select the way in which you specify the register
or registers to which the operation applies.
F7 (ALL): Specify all registers.
F8 (BLOCK): Specify a block of contiguous registers.
F9 (ONE): Specify a single register.
• If you pressed F7 (ALL), proceed to step 6.
• If you pressed F8 (BLOCK) or F9 (ONE), the register number input
position switches to reverse video, and for move, swap and copy
operations, "FROM" and "TO" also appear. In this case continue to
step 4.
DELETE
NAME
ALL
F4
F5
F6
F7
SELECT
BLOCK
ONE
EXEC
F8
F9
F10
(Continued)
9-7
Chapter 9 Registers
Advertisement
Table of Contents
