Sony DVS-7300 System User Manual page 421

Setup Relating to Interfaces With Peripheral Devices
(PERIPH Menu)
Carrying out setup relating to auxiliary bus control from an
RS-422A port of the switcher (AUX CONTROL menu)
You can use the AUX CONTROL menu for the following settings.
• Setting the control function for bus control from an RS-422A port: For
• Selecting the function setting for recalling auxiliary bus settings when
To carry out these settings, use the following procedure.
1
2
13-50
Chapter 13 Setup
the control of the bus outputs from each of the following switcher ports,
select ENBL (control enabled), DSBL (control disabled) or MANUAL
(status determined by the ENABLE menu setting (see page 12-4)).
PANEL 1, DME 1 to DME 4, EDITOR A/REMOTE 1, EDITOR B/
REMOTE 2, PANEL 2/REMOTE 3
executing a key frame or snapshot: Select whether when executing a key
frame or snapshot to recall the saved auxiliary bus settings (ENBL) or
keep the current settings unchanged (DSBL).
In the PERIPH menu, press F4 (AUX CTRL).
The AUX CONTROL menu appears.
BUS
PANEL1 DME1
SELECT
#2 ENBL MAN
F1 F2 F3
Function key indications in the AUX CONTROL menu
Press F1 (BUS SELECT) or turn control knob 2 to move the cursor and
select the bus to which the settings apply from buses AUX 1 to AUX 13,
the edit preview (EDIT PVW) bus, or the routing switcher buses (EXT 1
to EXT 16) controlled by the switcher.
DME2 DME4 EDIT A
DME3
MAN MAN MAN MAN
F4 F5 F6 F7
KF/
EDIT B PANEL2 SS
MAN ENBL ENBL
F8 F9 F10