Sony DVS-7300 System User Manual page 323

Basic Register Operations
4
5
6
7
9-8
Chapter 9 Registers
Depending on the operation you are carrying out, enter a register number
using the numeric keypad (using the numeric keys, then pressing the
ENTER button) as shown in the following table.
Operation Register number
Move Register whose contents are to be moved
Swap One of the registers to be swapped
Copy Register whose contents are to be copied
Lock Register to be locked
Unlock Register to be unlocked
Delete Register whose contents are to be deleted
• If in step 3 you pressed F8 (BLOCK), enter the first and last registers in
the block of registers to which the operation applies.
• After pressing the ENTER button to confirm the setting, continue to
step 5 for a move, copy, swap, lock or unlock and skip to step 6 for a
delete operation.
Enter the number of the destination register for a copy or move, or the
other register in a swap, in the reverse video position to the right of
"TO", using the numeric keypad.
If in step 3 you pressed F8 (BLOCK), enter the first register number
only.
Press F10 (EXEC).
The function key indications change, and F9 (YES) and F10 (NO)
functions appear.
Press F9 (YES).
This carries out the required operation.
To abandon carrying out the operation
Press F10 (NO).
Input position
Reverse video position
to the right of "FROM"
Reverse video position