System Information (Sysinfo) - Thales Z-Max Operation And Application Manual

System Information (SYSINFO)

The SYSINFO menu displays basic receiver information such as serial number,
options and version and receiver power and memory status. To enter SYSINFO from
the top level, use the UP/DOWN keys until 'SYSINFO' is displayed and press ENTER.
Use the UP/DOWN keys to display the following parameters.
Receiver Software Version Number (VER: ****)
Version of the firmware installed within the receiver.
Receiver Serial Number (S/N: ************)
Serial number of the receiver.
Firmware Options. (Options: **********)
A string that denotes the options enabled in the receiver. See the Receiver
Options section in Chapter 1 for an explanation of the option codes.
Power Status (BAT:** min)
Indicates the amount of power left in the Power Module. This value is
expressed in minutes of remaining time left based upon the current rate of
power consumption. If the Power Module is not connected, it will show 0
minutes. Power status does not apply to the external battery.
Memory Status (MEM: *** %)
Displays the percentage of memory left on the SD memory card. Occasionally
after a power cycle, the receiver file system will slow mount. This process
takes several minutes and the field MEM will display xx%.
NOTE: The firmware version number, the receiver serial number and the firmware options are
needed when contacting Technical Support.
50 Z-Max Surveying System Operation and Applications Manual