Figure 3.5 Static Setup - Thales Z-Max Operation And Application Manual

System. The system is then placed in the tribrach mounted on the tripod over the
point.
Rover - A rover setup is designed to be mobile and carried by a person. The Z-
Max rover setup is used for post-processed kinematic data collection. A Z-Max
rover may either be range-pole mounted or backpack mounted.
Pole-Mounted: A typical configuration for a pole-mounted rover includes,
GPS Receiver Module, Power Module, V-Module and Pole Adapter. In the
pole-mounted configuration (Figure 3.6), the entire rover system (with
modules attached) is attached to the top of the survey pole. The bottom of the
Z-Max GPS Receiver Module has a 5/8" threaded receptacle that fits
standard survey poles. The handheld computer, if used, can also be attached
Connecting System Hardware

Figure 3.5 Static Setup

119