Thales Z-Max Operation And Application Manual page 99

UP/DOWN control keys to enter the PIN number. If no PIN number is
set in the SIM card then nothing is entered in this field.
Number of retries. (RETRY: **)
This parameter sets the number of times the rover modem will attempt to
redial the base modem before giving up. Valid values are from 0 to 15. To set
the number of retries, press the ENTER key and use the control keys to enter
a value. The default number of retries is 2.
Dial the base GSM modem. (DIAL)
This parameter dials the base modem. To dial the base modem, press
ENTER. A confirmation message "Dial base?" will appear. Press ENTER to
confirm or CANCEL to cancel. The modem will dial the number entered in the
SETUP submenu. While dialing, the STATE submenu (see below) will display
"DIALING". When the connection has been established, the STATE submenu
will display "ONLINE".
Disconnect the call. (HANG UP)
Press ENTER to terminate the current connection to the base modem. The
confirmation message "Disconnect call?" will appear. Press ENTER to
confirm or CANCEL to cancel.
Power on/off the modem. (PWR: **)
The PWR submenu is NOT a power status indicator for the GSM modem, but
a submenu that allows you to power the modem on or off. The power must be
turned on for the GSM modem to be used; AUTO mode will not automatically
turn on the modem. Once the power is turned on the modem will
automatically initialize to the carrier. To change the power status, press
ENTER and scroll to either OFF or ON. Press ENTER to select it. The
modem status can be monitored in the STATE submenu (see below).
GSM modem operational status. (STATE: **)
Displays the current state of the GSM modem. Status values are:
GSM ON = power on
GSM OFF = powered off
GSM INITIALIZED = modem has been initialized
DIALING = dialing the base modem
ONLINE = powered on and connected to the base modem.
76 Z-Max Surveying System Operation and Applications Manual