Appendix B User Parameters; Table B.1User Parameters - Thales Z-Max Operation And Application Manual

User Parameters
Table B.1 lists the more common user parameters. This table also indicates where to
change the parameter and if applicable, the default value. If the parameter is available
from the front panel display, the Front Panel column indicates the submenu where the
parameter can be found. If the parameter is available using a serial command, the
Serial Command column lists the command name.
Antenna offsets
Base station position
Baud rate
Beep setting
Close session
Data recording/ output interval
Delete files
Elevation mask
Epoch counter
Memory reset
Minimum number of satellites for data
recording/output
Minimum number of satellites for kine-
matic surveying
Reset factory defaults
Restart session
RTK base port
RTK rover port
Save user parameters
Site ID
Stop session
Appendix B - User Parameters

Table B.1User Parameters

Description Front Panel
SURVEY:mode
SURVEY:mode
SETTINGS
SETTINGS
SESSIONS
SURVCONV
SESSIONS
SURVCONF
SURVCONF
SETTINGS
SURVCONF
SURVCONF
SETTINGS
SESSION
SURVCONF
SURVCONF
SETTINGS
SURVEY:mode
SESSION
Default
0.0
n/a
9600
ON
n/a
20.0
n/a
10
0
n/a
3
0
n/a
n/a
273