Figure 3.4 Fast Terminal - Thales Z-Max Operation And Application Manual

If you plan to use the backpack configuration, then we recommend that a cable be
used between the handheld and the receiver. If you need to use a cable, the computer
communication cable connects to the Z-Max via one of the two serial ports on the
back panel of the receiver. These two ports are labeled SERIAL A and SERIAL B.
The handheld can be connected to the receiver at any time during the equipment
setup and data collection process.

Figure 3.4 FAST Terminal

FAST Terminal
The FAST Terminal is offered as an option with the Z-Max System for post-processed
surveys. It is lightweight, durable and weather resistant for use in outdoor
environments. The FAST Terminal allows both wireless and cabled connections with
the Z-Max Receiver Module and a PC. When using a cable connection, the FAST
Terminal should be connected to serial port A on the GPS Receiver Module (labeled
SERIAL A). The FAST Terminal supports use of Bluetooth wireless with a module that
is installed in the compact flash receptacle of the device. The compact flash
receptacle is located underneath the FAST Terminal battery in a compartment located
at the lower back of the device. Please refer to the FAST Terminal user manual for
more details.
Connecting System Hardware 117