Gps Receiver - Receiver Power System; Figure 3.21 Connecting Communication Module To Gps Receiver Module - Thales Z-Max Operation And Application Manual

Figure 3.21 Connecting Communication Module to GPS Receiver Module

The Communication Module is now installed and ready to be configured.

GPS Receiver - Receiver Power System

The rover system will be powered solely by the Power Module in most user scenarios.
Make sure that the Power Module is fully charged before going out to the field.
The Power Module for the rover system is identical to the Power Module for the RTK
base system. The Power Module connects directly to the GPS Receiver Module
without cables. Just like the RTK base system, the Power Module connects to the left-
hand side of the GPS Receiver Module. To connect the module, align the module and
the housing and insert the small ledge of the module into the rear of the GPS
Receiver Module housing as shown in Figure 3.22. Swing the module closed until the
202 Z-Max Surveying System Operation and Applications Manual