Table of Contents
Advertisement
Note - Though the
MobileMapper Beacon
is primarily intended for
use with our
MobileMapper and
MobileMapper CE GPS/
GIS data collections sys-
tems, it may be used with
any GPS system that
support RTCM-based
real-time differential
corrections. In order to
connect to other devices,
you will need to ensure
the GPS supports either
Bluetooth wireless tech-
nology or an RS-232
serial port.
Introduction
The Thales MobileMapper Beacon system is an accessory to
the Thales MobileMapper CE GPS data collection system.
The MobileMapper Beacon is a self-contained, Coast Guard
beacon receiver system. It features an internal beacon re-
ceiver and magnetic field beacon antenna, wireless commu-
nications, and a compartment for 4 AA batteries.
The following figure illustrates the use of the MobileMapper
Beacon.
Receiving Your Shipment
If you find that any of the items are damaged due to ship-
ment, please contact the freight carrier immediately for as-
sistance. If you find that the system is incomplete for some
reason, please contact your point of sale for assistance.
MobileMapper Beacon System
Each MobileMapper Beacon system is composed of:
• MobileMapper Beacon Coast Guard beacon receiver unit
• 4 AA Batteries
• Belt-mounted carrying system
• 1 battery clip for easy loading of batteries
• Warranty card
• User Manual
• A PC-interface cable for serial communications.
3
Advertisement
Table of Contents
