Figure 4.8 Gsm Base Menu - Thales Z-Max Operation And Application Manual

COM OPTN: GSM BASE
The GSM Base menu is shown in Figure 4.8.
GSM
BASE
To access the GSM BASE menu from COM OPTN, press ENTER and use the UP/
DOWN control keys until GSM BASE is displayed. Press the ENTER key to enter the
menu.
When the GSM BASE menu is entered, the SETUP submenu is the first submenu
displayed. The GSM setup should be done first. Setup parameters can be saved to
memory be performing a SAVE from the SETTINGS submenu.
From the SETUP submenu, all other GSM Base parameters can be accessed by
using the UP control key. To move back to a previous menu item, press the DOWN
control key. To exit the GSM Base setup menu, press the CANCEL key from any of
the submenus. The parameters are described in order as follows:
Configure the GSM. (SETUP)
This submenu is the entry point for the initial setup of the GSM modem. Press
the ENTER key to access the following parameters:
Band setting. (BAND: ****)
The band parameter sets the operable frequency band. In general, set
this parameter to 1900 in North America or 900/1800 elsewhere, but
verify this with your GSM service provider. To select the band, press
ENTER, scroll to the desired value and press ENTER to select it.
Operation
ENTER
ENTER
SETUP
CANCEL
CANCEL
HANG UP
PWR
STATE

Figure 4.8 GSM Base Menu

BAND
PIN
Symbology:
Thin arrow - Enter or Cancel Key
Thick Arrow - Up or Down Key
77