twist the threaded collar on the GPS Antenna Module until the module is securely
locked in place.
Figure 3.31 GPS Antenna Module - UHF Antenna Module Connection
GPS Receiver - Range Pole RF Adapter
From previous steps, the Max-RF Adapter has been installed on the GPS Receiver
Module and the Range Pole RF Adapter is connected to the survey pole. The GPS
Antenna and the UHF Antenna (or Pole Adapter) are attached to the top of the Range
Pole RF Adapter. The GPS Receiver Module is connected to the survey pole by
connecting the Max-RF cable between the Range Pole RF Adapter and the Max-RF
Adapter as shown in Figure 3.32. Make sure that the correct cable is attached to the
correct connection and check that the cable connections are secure.
212
Z-Max Surveying System Operation and Applications Manual