Figure 4.5 Z-Max Survey System Performing A Static Survey - Thales Z-Max Operation And Application Manual

Once data collection is completed at a given location, the Z-Max receiver system can
be moved to the next location for another data collection session. Remember that only
common data between receivers is used. When the receiver is powered down the
active measurement file is automatically closed, and when the receiver is powered
back up a new measurement file is automatically created. At the end of the day the
receivers are returned to the office where the data are downloaded to the PC for post-
processing.
Figure 4.5 shows what a typical Z-Max system for static data collection should look
like.

Figure 4.5 Z-Max Survey System Performing a Static Survey

Survey Preparation and Execution 131