Thales Z-Max Operation And Application Manual page 101

PIN number. (PIN: **** )
Sets the Personal Identification Number required for the GSM modem
SIM card. This number is provided by your GSM service provider, and
ranges from 4-8 digits. To set the PIN, press the ENTER key, use the
control keys to enter the number, and press ENTER again to select it.
Disconnect the call. (HANG UP)
Press ENTER to terminate the current connection to the remote modem. The
confirmation message "Disconnect call?" will appear. Press ENTER to
confirm or CANCEL to cancel.
Power on/off the modem. (PWR: **)
The PWR submenu is NOT a power status indicator for the GSM modem, but
a submenu that allows you to power the modem on or off. The power must be
turned on for the modem to be used. Once the power is turned on the modem
will automatically initialize to the carrier. To change the power status, press
ENTER to access the submenu, scroll to either OFF or ON and press ENTER
to select it. The modem status can be monitored in the STATE submenu (see
below).
GSM modem operational status. (STATE: **)
Displays the current state of the GSM modem. Status values are:
GSM ON = power on
GSM OFF = powered off
GSM INITIALIZED = modem has been initialized
ONLINE = powered on and connected to the remote modem.
78 Z-Max Surveying System Operation and Applications Manual