Communication Options (Com Optn) - Thales Z-Max Operation And Application Manual

Communication Options (COM OPTN)

The Communication Options menu allows you to configure the communications
devices. Each communication device supported by Z-Max will have its own specific
menu choice.The COM OPTN is used to configure both the radio in the
Communication Module as well as an external radio connected to an external serial
port. If the data link is not available, then you will not be able to configure it. To get into
COM OPTN from the top level, use the UP/DOWN keys until 'COM OPTN' is
displayed, then press the ENTER key. Use the UP/DOWN keys to display the four
submenus. Enter each submenu by pressing the ENTER key.
COM OPTN: THALES RADIO
The Thales Radio menu is shown in Figure 4.5. To access the Thales radio menu
from COM OPTN, use the UP/DOWN control keys until THALES RADIO is displayed,
and press the ENTER key.
When the Thales radio submenu is entered, the PORT parameter is the first
parameter displayed. From this level, all other Thales Radio parameters can be
accessed using the UP control key. To move back to a previous menu item, press the
DOWN control key. Pressing the CANCEL key from any of the submenus will exit the
Thales radio submenu.
Note: it is recommended that you configure the parameters in the order in which they are displayed.
In particular, you must load the radio parameters (LOAD) prior to sending user settings
(PROGRAM).
68 Z-Max Surveying System Operation and Applications Manual