Figure 2.7 Max-Rf Adapter - Thales Z-Max Operation And Application Manual

Adapter connects to the top of the GPS Receiver Module in the same receptacle
where the GPS Antenna Module connects during a static survey (Figure 2.7).

Figure 2.7 Max-RF Adapter

Pole Adapter
The Pole Adapter is used when the Z-Max System is functioning as a kinematic
post-processed rover. The Pole Adapter is used to raise the GPS Antenna
Module high enough on the survey pole so that the antenna's view to the satellites
is not blocked by the user. The Pole Adapter connects between the GPS Antenna
Module and the GPS Receiver Module when using a pole-mounted system, or
between the GPS Antenna Module and the Range Pole RF Adapter (see below)
when using a backpack-mounted system (Figure 2.8). The pole adapter is the
same size and shape as the UHF antenna.
System Components 107