Appendix A Serial & Power Port Pinouts; Figure A.1. Power Receptacle Front View; Table A.1 Power Connector Pinouts - Thales Z-Max Operation And Application Manual

Serial & Power Port Pinouts
This appendix supplies the pinout specifications for the external power, USB, and
serial ports in the GPS Receiver Module.
Power Port
The rear panel of the GPS Receiver Module has one connector for external power.
External power is supplied through a 3-pin Fischer connector, Figure A.1. This
connector also provides one pin for a boot signal (Table A.1).
Pin
Signal Name
Number
1 GND
2 VEXT
3 Reserved
Appendix A - Pinouts

Figure A.1. Power Receptacle Front View

Table A.1 Power Connector Pinouts

External Power Ground
External Power Input, 9-28V DC
Leave unconnected
Description
269