Thales Z-Max Operation And Application Manual page 114

Warning
Data Card Full
† Data Card Full < 5 min
Data Card Error: Access
Data Card Error: Update
Data Card Error: Create
Data Card Error: Rename
Data Card Error: Corrupted
FAT
Not Enough Satellites
Antenna Overload
Operation
Table 4.6. Warning Messages (continued)
Definition
There is no space left on the SD
memory card.
There is less than 5 minutes of
data recording left on the current
SD memory card.
Cannot read or write to SD mem-
ory card.
Cannot update the FAT (file allo-
cation table) of the SD memory
card.
Cannot create the files for a new
session: cannot record data.
Cannot rename the files of the
session.
File Allocation Table on the SD
memory card has been corrupted.
MISCELLANEOUS WARNINGS
Tracking fewer than the minimum
number of satellites required for
kinematic survey.
Antenna installation problems.
The setup is drawing more than
150 mA (there is a short on the
antenna cable or the LNA is draw-
ing too much current).
Action
Delete data from the current card or
replace current SD memory card
with another SD memory card with
available memory.
Delete data from the current card or
replace current SD memory card
with another SD memory card with
available memory.
Power cycle receiver. If problem per-
sists, re-initialize the receiver using
the power key (download data first).
If problem persists, replace the SD
memory card.
Power cycle receiver. If problem per-
sists, re-initialize the receiver using
the power key (download data first).
If problem persists, replace the SD
memory card.
Power cycle receiver. If problem per-
sists, re-initialize the receiver using
the power key (download data first).
If problem persists, replace the SD
memory card.
Power cycle receiver. If problem per-
sists, re-initialize the receiver using
the power key (download data first).
If problem persists, replace the SD
memory card.
Power cycle receiver. If problem per-
sists, re-initialize the receiver using
the power key (download data first).
If problem persists, replace the SD
memory card.
The kinematic survey must be reini-
tialized on the last point.
Check that the antenna connection is
secure. If using optional cables,
check for loose or incorrect connec-
tion or damaged cable.
91