Table A.3 Pinout Of Serial Port B; Table A.4 Pinout Of Usb Connector - Thales Z-Max Operation And Application Manual

Pin Signal
1 +12V
2 GND
3 CTSB/RX-
4 RTSB/TX+
5 RXDB/RX+
6 TXDB/TX-
7 EVENT
USB Port
The high-speed USB port is located in the compartment of the front panel. The
connector is a type-B USB connector with the following pin-outs (Table A.4).
Pin Signal
1 VBus
2 D-
3 D+
4 GND
5 GND
6 GND
Appendix A - Pinouts

Table A.3 Pinout of Serial Port B

DC voltage +12V
Ground
Serial port B, clear to send/RS422 inverting input
Serial port B, request to send/RS422 non-inverting output
Serial port B, receive data/RS422 non-inverting input
Serial port B, transmit data/RS422 inverting output
Event marker input

Table A.4 Pinout of USB Connector

USB bus power input powers the USB transceiver
D- line
D+ line
Ground
Ground
Ground
Description
Description
271