Thales Z-Max Operation And Application Manual page 112

Warning
MODEM Not Detected
MODEM Not Responding
Enter Phone Number
MODEM No Carrier
MODEM Line Busy
MODEM Invalid PIN
MODEM SIM Card Locked
MODEM Insert SIM Card
MODEM Initialization Error
MODEM SIM Card Failure
Solution Is Float
Invalid Site ID
Distance Interval is 0 Meter
Time To Stay Is 0 Second
Not Receiving Base Data
Operation
Table 4.6. Warning Messages (continued)
Definition
GSM WARNINGS
GSM modem not detected
Can not communicate with GSM
modem
Need to enter Base receiver
phone number
Attempt to call Base receiver
unsuccessful
Base receiver gives busy signal
when called
PIN is required and the one pro-
vided by user is incorrect and
does not work.
Wrong PIN has been entered,
causing the SIM card to lock up.
There is no SIM card in the Com-
munication Module.
Cannot initialize modem
SIM card failed.
RTK/RTCM WARNINGS
The CPD solution is a float not a
fixed solution.
One or more characters entered
in the Site ID field are invalid
For a trajectory survey, the dis-
tance interval must be > 0 meters.
For an Auto Point survey, the
Time to Stay must be > 0 sec-
onds.
Not receiving RTK carrier phase
data from the base receiver.
Action
Verify a GSM modem is in the Radio
.Module, and verify that the module
is securely connected.
Verify a GSM modem is in the Radio
.Module, and verify that the module
is securely connected.
Enter the correct base station GSM
modem phone number.
Verify that the GSM base is up and
operational.
Re-try later.
Verify PIN number.
Contact your GSM service provider.
Insert valid SIM card.
1. Verify the BAND is correct.
2. The GSM network may be tempo-
rarily down. Wait 20-30 minutes and
try again.
3. Contact your service provider.
Contact your GSM service provider.
n/a
Re-enter valid Site ID
Enter a value > 0 in the Distance
Interval field of the SURVCONF sub-
menu.
Enter a value > 0 in the Time To Stay
field of the SURVCONF submenu.
Check serial/data link with the base.
Ensure base is computing a position.
Ensure a valid position was entered
into the base receiver.
89