Thales Z-Max Operation And Application Manual page 81

HRMS (HRMS: *.***m)
Displays the horizontal RMS value (in meters) computed during data
logging. RMS is an estimate of the 1-sigma position accuracy. This
field will display up to 99.999 meters.
VRMS (VRMS: *.***m)
Displays the vertical RMS value (in meters) computed during data
logging. RMS is an estimate of the 1-sigma position accuracy. This
field will display up to 99.999 meters.
Stop Data Logging (STOP?)
Press the ENTER key to stop manual data logging. The query "Stop
data logging?" will appear. Press ENTER to confirm or CANCEL to
cancel. If data logging is stopped, the display will jump back to level 2.
AUTO POINT
Site ID (SITE: ****)
Displays the current setting of the 4-character Site ID. To change the Site ID
and begin data logging, press the ENTER key and use the control keys to
enter the Site ID.
Once the Site ID is entered, data will automatically log for the duration of the
Time To Stay field set in the SURVCONF menu. Data will only be logged if the
receiver is computing "fixed" RTK positions (the RTK SOL LED is blinking
green). While logging is in progress, data can be monitored with the LOG,
HRMS, and VRMS parameters described below.
When logging at this site is complete, the Site ID field will automatically
increment by 1 (if the last character is numeric) and display the new Site ID.
Data logging resumes when the ENTER key is pressed.
Data Logged (LOG: ***s)
Displays the amount of data logged in seconds. When this value
reaches the 'Time To Stay' value set in the SURVCONF submenu, the
incremented Site ID will be displayed. This field will not increment if no
SD card is inserted.
HRMS (HRMS: *.***m)
Displays the horizontal RMS value (in meters) computed during data
logging. RMS is an estimate of the 1-sigma position accuracy. This
field will display up to 99.999 meters.
58 Z-Max Surveying System Operation and Applications Manual